Expert Answers about Tonneau Covers
- How Much Does the RetraxONE MX Tonneau Cover for a 2018 Ford F-350 with 6-3/4 Foot Bed Weigh
- The RetraxONE MX Hard Tonneau Cover part # RT60383 which is a fit for your 2018 Ford F-350 with the 6-3/4' has a shipping weight of 90 lbs which means the cover most likely weighs around 85lbs. This is going to be the lightest RetraxONE tonneau cover available for your truck. Please keep in mind that this tonneau cover will cover the stake pocket holes. For the exact same tonneau cover but with cutouts for the stake pocket holes you will want to use the RetraxONE MX Hard Tonneau Cover part...
view full answer... - Most Popular Tonneau Cover For 2021 Toyota Tacoma With 6 Foot Bed
- Since there are both hard tonneau covers and soft tonneau covers, let's go ahead and talk about the most popular for each type on a 2021 Toyota Tacoma with a 6 foot bed, starting with the hard tonneau cover:
- Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWTA13A37
The Switchblade is the most popular because of its combination of ease of use and aesthetic. The # 311-SWTA13A37 offers simplicity starting with the install that only requires you to mount its clamps to your...
view full answer... - How Weather-Resistant Is Craftec Hatch-Style Tonneau Cover
- The Craftec Hatch-Style Tonneau Cover, part # 352128 is a one-piece lightweight tonneau cover, and has two hidden latches at the rear so you will not have a problem with it flapping in the wind when installed on your 2000 Dakota.
The tonneau cover also has a dense foam weatherstrip attached to the bottom of the cover to help keep water out and also help protect the paint finish on your truck. I recommend making sure you keep the weatherstrip cleaned and possibly use something like Armor...
view full answer... - Tonneau Cover For 1967 Chevrolet C-10 Pickup Truck With 6-Ft Bed
- We offer one Tonneau Cover that is designed to fit your 1967 C-10 truck with a 6-ft bed.
It is the Craftec Hatch-Style Tonneau Cover, part # 251185 you came from. This cover is only available in Black as shown. This cover requires no drilling for installation and when installed will sit about 3/8 inch above the truck bed rails.
view full answer... - Does BAKFlip G2 Hard Tonneau Cover Secure Tailgate On 2011 Toyota Tacoma With Non-Locking Tailgate
- When the BAKFlip G2 Hard Tonneau Cover, part # BAK26407 is installed it will be secured in place with latches attached to the underside of the Tonneau cover near the tailgate.
If you do not have a locking tailgate, the Tonneau cover will not lock it in place. The tailgate will still operate that same. You do need to lower the tailgate to reach the tabs you pull to release the cover and allow it to be folded. I have attached a link to an installation video for this cover you can check...
view full answer... - How Does Lomax Hard Tonneau Cover for 2023 Ram 1500 with Multi-Function Tailgate Lock
- Yes, the release handle for the Lomax Hard Tonneau Cover part # LOM54FR can only be accessed from inside the truck bed so you'll need to have the tailgate open for this to happen. In other words, if the tailgate is locked then so is your tonneau cover. It's a bit dirty but I did find an install photo for you of this cover on the same truck with the same tailgate option.
view full answer... - Is Access Toolbox Edition # 834532000821 Tonneau Cover Waterproof
- When installed, the DeeZee # DZ8170DB tool box will sit flush against the front of the truck bed, but will not overhang the front of the bed. There will be a very small gap there that could admit water in a torrential downpour.
I'm assuming you're speaking of the Access # 834532000821 Toolbox Edition Tonneau Cover. The cover will fit pretty snug up against the toolbox, but none of the tonneau covers we offer are billed as being waterproof. Even the tightest fitting tonneau can allow water...
view full answer... - Leer HF650M Hard Folding Tonneau Cover Availability For A 2020 Ram 1500
- Yes, the Leer Hard Tonneau Cover # LE99FR is the Leer HF650M Hard Truck Bed Cover. This tonneau cover is a confirmed fit for your 2020 Ram 1500 6-1/2' bed without - RamBox.
view full answer... - Tonneau Cover That Fits 2016 Ram 1500 That Locks in Different Positions
- There is a tonneau cover that fits your 2016 Ram 1500's 6-1/2' bed that can be maneuvered incrementally, but the Pace Edwards SwitchBlade Metal Hard Tonneau Cover # 311-SMD7833 will not lock at different spots along the rails.
I recommend checking out the Pace Edwards JackRabbit Hard Tonneau Cover # 311-JRD7833 which can be positioned at 12" intervals along your Ram's bed with the use of a latching system.
view full answer... - Is the Pace Edwards 311-SWC95A17 SwitchBlade Hard Aluminum Retractable Tonneau Cover Lockable
- The # 311-SWC95A17 Pace Edwards tonneau cover you refer to isn't in of itself lockable, but because the cover only opens from the underside as long as the truck tailgate is locked the tonneau cover will be secure. If you click the provided link, you can see a product description video featuring this cover. I've also linked to an installation video that you might find helpful.
view full answer... - Can The Bestop Hard Tonneau Cover Be Locked
- The only way to lock the Bestop Hard Tonneau Cover for BestRail Channel Kit System # B42751 would be to slip a small lock through the holes of the latch to prevent anyone from opening it.
view full answer... - Can Middle of Access Lorado Tonneau Cover be Opened on 2003 Chevy Silverado 2500 w/ 6-1/2 Bed
- I suppose if someone wanted to bad enough, they could pry open the middle of the Access Lorado Soft Roll-Up Tonneau Cover # 834532006380.
There isn't anything specifically that stops the middle of the cover edge from being lifted, but I gotta say, it would be awfully tough to do so. Someone would need some type of tool to pry it open, and that wouldn't go unnoticed. So your 2003 Chevy Silverado 2500 with a 6-1/2 foot bed would still be well protected with the Access Lorado Soft, Roll-Up...
view full answer... - Does The TruXedo TruXport Tonneau Cover # TX272001 Come With A Locking Mechanism
- TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX272001 is the full setup and not just a replacement part. It does not come with a locking mechanism but instead mounts into the connectors at the end of the bed and would require you to lock your tailgate to prevent unwanted visitors.
If you can provide me with the year/make/model of your vehicle and any other features you'd prefer to have (roll-up, retract, ladder rack compatible, etc.) I can find the correct tonneau cover for your needs.
view full answer... - Is There A Picture Of The Extang Replacement Clamps For BlackMax And Classic Platinum Tonneau Covers
- We don't currently have a picture of part # EX2625-26 but these would be the aluminum clamps that clamp the rails of an Extang BlackMax or Classic Platinum soft tonneau cover to the lip of the truck's bedrails. There is a tech note for these covers that supplemental clamps may also be necessary but you'll need to refer to the owner's manual to confirm the correct part number.
view full answer... - Why Is The Serial Number Important To Have When Looking For Tonneau Cover Replacement Parts
- The serial number listed on the bulkhead of the of a TruXedo tonneau cover, like the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX571101 you were looking at, can be used by TruXedo to determine the model number of the cover, which can then help find the correct replacement components for the cover. If you have the serial number and date code you can also reach out to TruXedo to get the correct replacement parts information from them.
view full answer... - Does Pop & Lock Power Pop Remote Keyless Entry Kit PAL9000 Open Tonneau Cover
- Yes, the Pop & Lock Power Pop Remote Keyless Entry Kit # PAL9000 will both unlock and partially open your Undercover hard fiberglass tonneau cover so that the struts can do the rest. The kit includes powered latches that replace your standard ones and also two remote control key fobs and an in-cab button for two ways to operate the lock.
Please note that the kit works only on covers with the single handle, but not on covers with dual handles. It should not be wired to work from your factory...
view full answer... - Is Bestop EZ Fold Folding Tonneau Cover For 2016 Ram 1500 Water Resistant Or Waterproof
- The Bestop EZ Fold Folding Tonneau Cover, part # B1624001 is water resistant but is not waterproof. Per the instructions that are included with the tonneau cover, water may be seeping in on the seams but you can treat the seams with 3M Scotchguard to stop the leaks.
If it is critical to keep something dry I recommend placing it in a waterproof container and elevating it a little off the floor of the bed to make sure water or moisture stays out.
view full answer... - Does Replacement Cover for Extang BlackMax Soft Tonneau Cover # EX1790 Have Individual Metal Snaps
- The Replacement Cover for Extang BlackMax Soft Tonneau Cover, # EX1790, has individual metal snaps. I have included a photo as an example.
This cover is designed as a replacement for the Extang BlackMax Soft Tonneau Cover, # EX2790, so if this is what you have installed on your 2004 Ford F-150 with 6-1/2 ft bed, this replacement cover will work for you.
view full answer... - Type of Tonneau Cover That Best Resists Entry of Moisture
- There is no tonneau cover made that is absolutely, positively 100-percent water tight under all circumstances and conditions. Water tends to find a place where it can flow and that will inevitably include even the tiniest gaps left after even the finest tonneau cover is installed correctly.
Anything that is rated to resist water - a wristwatch is a good example - is rated for a specific degree of resistance under specific conditions. A watch may be rated to handle the pressure equal to...
view full answer... - Why Does The Replacement Velcro Shur-Bond Fastener for TruXedo Deuce Tonneau Covers Have 4 Strips?
- The Replacement Velcro Shur-Bond Fastener for TruXedo Deuce Tonneau Covers for 6' Beds # TX1117786 comes with 4 strips as the Deuce Tonneau has the front section that folds back. This is a feature exclusive to the Deuce cover that allows for access to items in the front of the truck bed.
view full answer...
Go To Results